|
Corning Cable Systems' Anaerobic Connector installation tool kits are designed with the installer in mind. Conveniently packaged in an easy-to-carry ballistic nylon bag, the tool kits are compact and easy to carry around the job site.
The standard consumable kit, TKT-ANAEROBIC2 (AC 286318), allows to installation and polishin of multimode and singlemode all-ceramic anaerobic connectors as well as the anaerobic GIC connectors. All connectors can be polished with this kit; LC, SC, FC and ST-compatible.
The anaerobic epoxy uses a two-part component process:
- the adhesive is first injected in the ferrule
- The fiber is then dipped into the primer and inserted into the connector. Curing of the epoxy takes one minute without the use of lamps or oven.
Features&Benefits
- Fast cure anaerobic adhesive; does not require electrical power, lamps or oven
- Installs without index matching gel
- Minimal tools required
- Hand polish; doesn't require polishing machine
- Low material cost
- The Glass-In-Ceramic (GIC) ferrule allows easy polishing with high yield reducing the installation time (less than 3 minutes to assemble and polish)
- Average insertion loss of 0.2 dB with physical contact polish
Have a look at the Anaerobic LineCard with Anixter Codes to understand better what included in the tool-kit and in the consumable kit and see which connectors to use with this specific solution.
|
|
|
|
|
|
<<Back
Email this Page to a Colleague>>
 Printer Friendly Format
|